The following catalog products are recommended for new applications. If the
product required is not shown, we may have a customized product for your
application. Please contact your CTS Representative for availability.
This product is covered by one or more of the following U.S. and foreign
patents:
US 5,977,863; TW NI-133,148; US 6,005,777; US 6,097,277; US 6,194,979; TW
NI-141,800; US 6,246,312; US 6,326,677; US 6,577,225;
US 6,749,775; US 6,856,516; US 6,882,266; US 6,897,761; US 6,946,733; US
6,963,265. -- Other U.S. and foreign patents pending.
9 line integrated terminator set provides
series termination at the source and parallel termination at the receiver.
Designed to meet Jadec Std. 8-9a.+/- 1% tolerance.
16 line or 32 line terminator provides series
termination at the source. Designed for CompactPCI PC card and memory
applications. Standard resistance tolerance +/-1%
8, 16 or 32 line terminator
provides parallel termination at the receiver. Designed with star pattern to
minimize crosstalk and improve high frequency performance. Tolerance +/- 1%
These LVPECL and LVDS
termination networks are designed for high performance termination of
differential Input/Output signals on some of the most popular Field
Programmable Gate Arrays (FPGAs). Designed for termination of Xilinx®
and Altera® FPGAs. 8 or 16 differential channels of termination provided in
a single integrated package.
This Resistor/Capacitor terminator network provides high performance
termination.
Designed with a ceramic substrate, this device virtually eliminates channel
capacitance, a primary cause of reduced system performance. In
addition, the BGA package eases routing design, saving the designer many
hours of printed circuit layout.
ClearONE Topside Probable Diagnostic Parts
Topside Probable Parts
In general, all ClearONE designs can be made available in Top Probe-Able
versions upon request. Many of the standard products are available
off-the-shelf, but your local CTS ClearONE representative should be
contacted for specific device ordering and availability details.
Figure 1 describes the proper numbering to convert a standard ClearONE part
number to the Top Probe-Able version. (See Topside Probable
Application Note for more information.)
Terminators
